12 SERVICE WORK ON THE CHASSIS 57
12.1 Raising the motorcycle with the lift stand
602730-01
(All 125/200 models)
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
– Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
– Secure the motorcycle against falling over.
602709-01
(All 250/300 models)
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
– Raise the motorcycle at the frame underneath the engine.
Lift stand (54829055000)
The wheels must no longer touch the ground.
– Secure the motorcycle against falling over.
12.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
– Always place the vehicle on a firm and even surface.
602731-10
(All 125/200 models)
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
– To park the motorcycle, press side stand 1 to the ground with your foot and
lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.
602704-10
(All 250/300 models)
– Remove the motorcycle from the lift stand.
– Remove the lift stand.
– To park the motorcycle, press side stand 1 to the ground with your foot and
lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up and secured with
the rubber band.
12.3 Bleeding the fork legs
Preparatory work
– Raise the motorcycle with the lift stand. ( p. 57)