EasyManuals Logo

KTM 125 ECX EU User Manual

KTM 125 ECX EU
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
7 SPEEDOMETER 25
Press the button
briefly.
Next display mode
7.1.17 Display mode SPEED/TR2 (trip master 2)
400324-01
– Press the button briefly and repeatedly until TR2 appears at the top right of the
display.
TR2 (trip master 2) runs constantly and counts up to 999.9.
The displayed value can be set manually with the button and the button . This is a
very practical function when riding using the road book.
Info
The TR2 value can also be corrected manually during the journey with the but-
ton and the button .
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.
Press the button . Increases value of TR2.
Press the button . Reduces value of TR2.
Press the button
for 3 - 5 seconds.
Deletes value of TR2.
Press the button
briefly.
Next display mode
7.1.18 Setting TR2 (trip master 2)
400324-01
Condition
• The motorcycle is stationary.
– Press the button briefly and repeatedly until TR2 appears at the top right of the
display.
– Press the button for 2–3 seconds until TR2 flashes.
The displayed value can be set manually with the button and the button . This is a
very practical function when riding using the road book.
Info
The TR2 value can also be corrected manually during the journey with the but-
ton and the button .
If 999.9 is exceeded, the value of TR2 is automatically reset to 0.0.
Press the button . Increases value of TR2.
Press the button . Reduces value of TR2.
Press the button
for 3 - 5 seconds.
Deletes value of TR2.
Press the button
briefly.
Next display mode
7.1.19 Display mode SPEED/A1 (average speed 1)
400325-01
– Press the button briefly and repeatedly until A1 appears at the top right of the
display.
A1 (average speed 1) shows the average speed calculated on the basis of TR1 (trip mas-
ter 1) and S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
The TR1, A1 and S1 displays are reset to 0.0.
Press the button
briefly.
Next display mode

Table of Contents

Other manuals for KTM 125 ECX EU

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 125 ECX EU and is the answer not in the manual?

KTM 125 ECX EU Specifications

General IconGeneral
BrandKTM
Model125 ECX EU
CategoryMotorcycle
LanguageEnglish

Related product manuals