EasyManuals Logo

KTM 125 ECX EU User Manual

KTM 125 ECX EU
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
7 SPEEDOMETER 29
400318-01
Repeatedly press the button briefly until H appears at the bottom right of the
display.
Press the button for 23 seconds.
The Setup menu is displayed and the active functions are shown.
Info
If no button is pressed for 1012 seconds, the settings are automatically
stored.
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the Setup
menu is closed.
Repeatedly press the button briefly until the desired function flashes.
The selected function flashes.
Activating the function
Press the button .
The symbol continues to appear in the display and the next function
appears.
Deactivating a function
Press the button .
The symbol disappears in the display and the next function appears.
7.2.5 Setting the clock
Condition
The motorcycle is stationary.
400330-01
Repeatedly press the button briefly until CLK appears at the bottom right of the
display.
Press the button for 23 seconds.
The hour display flashes.
Set the hour display with the button and/or button .
Wait 35 seconds
The next segment of the display flashes and can be set.
You can set the following segments in the same way as the hours by pressing
the button and the button .
Info
The seconds can only be set to zero.
If no button is actuated for 15-20 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
7.2.6 Viewing the lap time
Info
This function can only be opened if lap times have actually been timed.
Condition
The motorcycle is stationary.
400321-01
Repeatedly press the button briefly until LAP appears at the bottom right of the
display.
Briefly press the button .
LAP 1 appears on the left side of the display.
The laps 110 can be viewed with the button .
Press and hold the button for 35 seconds to clear the lap times.
Briefly press the button .
Next display mode
Info
When a signal from the wheel speed sensor arrives, the left side of the dis-
play changes back to the SPEED mode.

Table of Contents

Other manuals for KTM 125 ECX EU

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 125 ECX EU and is the answer not in the manual?

KTM 125 ECX EU Specifications

General IconGeneral
BrandKTM
Model125 ECX EU
CategoryMotorcycle
LanguageEnglish

Related product manuals