7 SPEEDOMETER 31
7.2.10 Setting the unit of measurement
400329-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the bottom right of the
display.
– Press the button for 2–3 seconds.
– Repeatedly press the button briefly until Km/h/Mph flashes.
In measurement unit mode, you can change the unit of measurement.
Info
If no button is pressed for 5 seconds, the settings are automatically stored.
Briefly press the
button .
Starts selection, activates Km/h display
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
Activates Mph display
Press the button
for 2–3 seconds.
No function
Wait 3–5 seconds Changes to the next display, changes from selection to the
Setup menu
Wait 10–12 sec-
onds
Saves and closes the Setup menu
7.2.11 Display mode SPEED/CLK (time)
400319-01
– Repeatedly press the button briefly until CLK appears at the bottom right of the
display.
The time is shown in display mode CLK.
Press the button
for 2–3 seconds.
The display changes to the Setup menu of the clock.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
No function
7.2.12 Setting the clock
400319-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until CLK appears at the bottom right of the
display.
– Press the button for 2–3 seconds.
Press the button
for 2–3 seconds.
Increases the value
Briefly press the
button .
Increases the value
Press the button
for 2–3 seconds.
Reduces the value
Briefly press the
button .
Reduces the value
Wait 3–5 seconds Changes to the next value
Wait 10–12 sec-
onds
Closes the SETUP menu
To Next Page
Loading...
Need help?
General
