10 SERVICE SCHEDULE 47
10.2 Service work (as additional order)
Annually
Every 80 operating hours/every 40 operating hours when used for motorsports
Every 40 operating hours
Once after 10 operating hours
Change the front brake fluid. x
●
Change the rear brake fluid. x
●
Change the hydraulic clutch fluid. x ( p. 81)
●
Grease the steering head bearing. x ( p. 67)
●
Check/set the carburetor components. x
● ●
Perform a fork service. (SIX DAYS) x
○ ● ●
Perform a fork service. (EXC, XC‑W) x
○ ● ●
Service the shock absorber. x
● ●
Check the starter drive. x (All 200/250/300 models)
● ●
Change the piston and check the cylinder. x (All 125 models)
● ●
Change the piston and check the cylinder. x (All 200/250/300 models)
●
Change the connecting rod, conrod bearing and crank pin. x
●
Check the transmission and shift mechanism. x
●
Change all engine bearings. x
●
○ One-time interval
● Periodic interval