KTM 125 ECX EU User Manual

7 SPEEDOMETER 26
7.1.20 Display mode SPEED/A2 (average speed 2)
400326-01
– Press the button briefly and repeatedly until A2 appears at the top right of the
display.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if S2 is not
stopped after the ride.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of TR2, A2 and S2 are reset to 0,0.
Press the button
briefly.
Next display mode
7.1.21 Display mode SPEED/S1 (stop watch 1)
400327-01
– Press the button briefly and repeatedly until S1 appears at the top right of the
display.
S1 (stop watch 1) displays the journey time on the basis of TR1 and continues when an
impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of TR1, A1 and S1 are reset to 0.0.
Press the button
briefly.
Next display mode
7.1.22 Display mode SPEED/S2 (stop watch 2)
400328-01
– Press the button briefly and repeatedly until S2 appears at the top right of the
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the button . Starts or stops S2.
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of S2 and A2 are reset to 0.0.
Press the button
briefly.
Next display mode
7.1.23 Table of functions
Display Press the button . Press the button . Press the button for 3 -
5 seconds.
Press the button
briefly.
Display mode SPEED/H
(service hours)
No function No function The display changes to
the Setup menu of the
speedometer functions.
Next display mode
Setup menu Activates the flashing
display
Deactivates the flashing
display
Setup menu starts,
stores the settings, and
changes to H or ODO.
Changes to the next dis-
play without changes
Unit of measurement
menu
Starts selection, acti-
vates Km/h display
Activates Mph display Saves and closes the
Setup menu
Changes to the next
display, changes from
selection to the Setup
menu
Display mode SPEED/CLK
(time)
No function No function The display changes to
the Setup menu of the
clock.
Next display mode

KTM 125 ECX EU Specifications

General

Brand	KTM
Model	125 ECX EU
Category	Motorcycle
Language	English