RIDING INSTRUCTIONS 10
107
10.5 Quickshifter
H01163-10
When the quickshifter is activated, you can shift up under load
without actuating the clutch.
Because there is no need to close the throttle grip, uninterrupted
gear shifts are possible.
The quickshifter uses the shifter shaft position to check whether or
not a shift should be initiated, and sends a corresponding signal to
the engine control.
If the quickshifter is disabled in the combination instrument, the
clutch needs to be actuated in the normal way for each shift.
The quickshifter does not support down-shifting, shifting in over-
run condition, or shifting in zero-load condition.
To Next Page
Loading...
Need help?
General
