19 SERVICE WORK ON THE ENGINE
236
S01125-10
–
Position plate
2
.
–
Mount and tighten screws
1
.
Guideline
Remaining screws,
chassis
M5 5 Nm (3.7 lbf ft)
Finishing work
– Check the engine oil level. ( p. 228)
19.3 Adding engine oil
Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
The engine may be damaged if the engine oil level is too high.
Condition
The engine is at operating temperature.
Preparatory work
– Stand the motorcycle upright on a horizontal surface.
– Check the engine oil level. ( p. 228)
To Next Page
Loading...
Need help?
General
