7 COMBINATION INSTRUMENT
72
7.10.11 "Load"
401833-01
Condition
• The vehicle is stationary.
• Engine is running.
– Press the UP or DOWN button until the "Load" menu appears on
the matrix display. Pressing the SET button opens the menu.
– Press the UP or DOWN button to select a loading condition and
activate it with the SET button.
In the "Load" menu you can select from four loading conditions.
The setting of the spring preload and the rebound is matched to
the load condition.
7.10.12 "Damping"
401831-01
– Press the UP or DOWN button until the "Damping" menu
appears on the matrix display. Pressing the SET button opens
the menu.
– Press the UP or DOWN button to select a damping setting and
activate it with the SET button.
In the "Damping" menu the settings for "SPORT", "STREET" and
"COMFORT" are available.
Info
If the setting for "Drive Mod" is changed, the relevant set-
ting for "Damping" will change at the same time.
To Next Page
Loading...
Need help?
General
