7 COMBINATION INSTRUMENT
44
7.28 Menu
F01784-10
Info
Press the SET button
1
in the start screen to open the
menu.
Navigate through the menu using the UP button
2
or
the DOWN button
3
.
By pressing the BACK button
4
, the menu structure jumps
one step back, or the menu is closed.
7.28.1 Motorcycle
I00211-01
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is highlighted.
Press the SET button to open the menu.
In Motorcycle, you can set the riding mode, ABS mode, traction
control, motor slip regulation, quickshifter+, seat heating, and the
heated grip.
When riding mode Rally (optional) is activated, the characteristics
of the throttle response, the slip on the rear wheel and the ABS
can also be configured.
7.28.2 Ride Mode
I00212-01
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is highlighted.
Press the SET button to open the menu.
Warning
Danger of accidents An incorrectly selected riding
mode makes control of the vehicle considerably more
difficult.
The riding modes are each only suitable for certain
conditions.
– Always select a riding mode that suits the surface
on which you are riding, the weather and the riding
situation.
– Press the UP or DOWN button until Ride Mode is highlighted.
Press the SET button to open the menu.
– Activate the menu item using the UP or DOWN button.
– Press the SET button to select the riding mode, which changes
coordinated settings for the engine and motorcycle traction
control.
Guideline
Only use riding modes Street and Rain on asphalt.
Only use riding modes Offroad and Rally (optional) on
unpaved roads.
Street - Homologated performance with balanced
response; the motorcycle traction control allows normal
slip on the rear wheel. ABS regulates both wheels.
To Next Page
Loading...
Need help?
General
