7 COMBINATION INSTRUMENT
60
– Move the previously paired device into the range of the vehicle
while the Bluetooth
®
function is active.
The device is automatically connected with the vehicle.
If the device is not automatically connected with the vehi-
cle after approx. 30 seconds:
– Switch on the vehicle again or repeat the New Pair-
ing procedure.
In the Riders Headset menu, a suitable rider headset can be paired
with the vehicle.
7.28.35 Headset Type (optional)
I00240-01
Condition
• The motorcycle is stationary.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
– Press UP or DOWN button until KTMconnect (optional) is
marked. Press the SET button to open the menu.
– Press the UP or DOWN button until Headset Type is highlighted.
Press the SET button to change the rider headset type.
The connection mode for the rider headset can be selected in
the Headset Type menu.
The headset is connected to the vehicle wirelessly via Bluetooth
®
in
Bluetooth Headset mode.
The headset is connected directly to the smartphone in
Corded Headset mode.
Info
The Riders Headset menu item is only available in Head-
set Type Bluetooth.
7.28.36 Shift Light
I00241-01
Condition
• The motorcycle is stationary.
• ODO > 1,000 km (621 mi).
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
– Press the UP or DOWN button until Shift Light is highlighted.
Press the SET button to open the submenu.
The shift warning light can be configured in the Shift Light sub-
menu.
To Next Page
Loading...
Need help?
General
