COMBINATION INSTRUMENT 7
65
Info
The menu languages are US English, UK English, Ger-
man, Italian, French, and Spanish.
7.28.49 DRL
I00255-01
Condition
• The motorcycle is stationary.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Settings is highlighted.
– Press SET button to open the menu.
– Press UP or DOWN button until DRL is highlighted. Press
the SET button to open the submenu.
Warning
Danger of accidents When visibility is poor, the day-
time running light is not a substitute for the low beam.
Automatic switching between the daytime running
light and low beam may only be partially available
when visibility is significantly impaired due to fog,
snow or rain.
– Ensure that the appropriate type of lighting is
always selected.
– If necessary switch off the daytime running lights
using the menu before going on a ride or when
stopped so that the low beam is switched on per-
manently.
– Make sure that the daytime running light is deac-
tivated with the diagnostics tool when the menu
item is not available, but the low beam is required.
(Your authorized KTM workshop will be glad to
help.)
– Note the legal regulations regarding the daytime
running light.
– Activate the menu item using the UP or DOWN button.
– Press SET button to switch the daytime running light on or off.
7.28.50 Heating (function optional)
I00256-01
Condition
• The motorcycle is stationary.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
– Press the UP or DOWN button until Heating is highlighted.
Press SET button to open the submenu.
The heated grip, rider seat heating and passenger seat heating can
be configured in the Heating submenu.
Info
In the Settings menu, the Heating submenu solely controls
the visibility of Heated Grips and Seat Heating in the Motor-
cycle menu.
To Next Page
Loading...
Need help?
General
