COMBINATION INSTRUMENT 7
55
7.28.24 call
I00268-01
Condition
• Bluetooth
®
function is activated.
• The Bluetooth
®
function should also be activated in the device
to be paired.
• The combination instrument is connected to a suitable phone.
• The combination instrument is connected to a suitable head-
set.
Warning
Danger of accidents Headphone volume which is too
high distracts attention from traffic activity.
– Always select headphone volume which is low
enough for you to still clearly hear acoustic signals.
– Press the SET button to accept an incoming call.
– Press the BACK button to reject an incoming call.
– Press and hold the UP button to increase the audio volume.
– Press and hold DOWN button to reduce the audio volume.
Info
It is not possible to change the audio volume using the
combination switch with every cellphone.
The call duration and contact are displayed. Depend-
ing on the cellphone settings, the contact is shown by
name.
If necessary, accessing contacts must be enabled on
the cellphone.
An incoming call is shown in a small window at the top
of the combination instrument display when the naviga-
tion function is active.
You cannot navigate in the menu during an active
phone conversation.
7.28.25 Call out
I00268-01
Condition
• Bluetooth
®
function is activated.
• The combination instrument is connected to a suitable phone.
• The combination instrument is connected to a suitable head-
set.
– Press the SET button when the menu is closed.
– Press UP or DOWN button until Call appears. Press the SET but-
ton to open the menu.
– Press UP or DOWN button until Last Calls or Favorites is marked.
Press the SET button to open the submenu.
– Press UP or DOWN button until the desired person is marked.
– Press SET button.
The selected person is called.
To Next Page
Loading...
Need help?
General
