COMBINATION INSTRUMENT 7
49
– Press the SET button to set the maximum permitted slip for the
motorcycle traction control.
Info
Do not open the throttle during the selection.
The spin adjuster is a motorcycle traction control function.
The slip adjustment allows the motorcycle traction control to be
tuned through nine levels to the desired characteristic map.
Level 0 allows the maximum slip on the rear wheel, and level 9
the minimum.
If the cruise control function is deactivated, the UP and DOWN but-
tons in the main display or in the Slip Adjuster menu can be used
to adjust the Slip Adjuster.
Info
The slip adjustment is only available in Rally riding mode
(optional).
The slip adjustment is only available when motorcycle trac-
tion control is activated.
Press and
hold the
DOWN button
for approx.
2 seconds.
Slip adjustment level 0 is activated.
7.28.11 Bike Info
I00221-01
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Bike Info is highlighted.
Press the SET button to open the menu.
General information and warnings that may be present can be
called up in Bike Info.
7.28.12 Bike Info
I00222-01
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Bike Info is highlighted.
Press the SET button to open the menu.
Tire Pressure (optional function) shows the current tire pressure of
the front and rear tires.
Water displays the coolant temperature.
Fuel Range displays the possible distance you can cover with the
fuel reserve.
Battery displays the battery voltage.
Odometer displays the total distance covered.
Service displays when the next service is due.
Warnings displays warnings that have occurred until they are no
longer active.
To Next Page
Loading...
Need help?
General
