Lantronix UDS2100 User Manual

1: Using This Guide
UDS2100 Device Server User Guide 10
Chapter Description
E: Alternative Ways to Assign
an IP Address
Provides detailed information about using DHCP, AutoIP, BOOTP
ARP, and Telnet to assign an IP address.
F: Binary to Hexadecimal
Conversions
Provides instructions for converting binary values to hexadecimals.
G: Compliance
Provides Lantronix compliance information.
Additional Documentation
Visit the Lantronix Web site at www.lantronix.com/support/documentation for the
latest documentation and the following additional documentation.
Document Description
UDS2100 Quick Start
Provides the steps for getting the UDS2100 up and running.
DeviceInstaller Online
Help
Provides instructions for using the Windows-based utility to
configure the UDS2100 and other Lantronix device servers.
“Live” Tutorials on the
Lantronix Web Site
(English)
Explain and demonstrate assigning an IP address to the UDS
and setting up the UDS and Com Port Redirector. See
http://ltxfaq.custhelp.com/app/answers/detail/a_id/1119.
Com Port Redirector
User Guide
Provides information on using the Windows-based utility to
create a virtual com port.

Lantronix UDS2100 Specifications

General

Isolation	1.5 kV
Certification	FCC, C/UL, CSA, VCCI, CE, TUV, CTick
Serial interface type	RS-232/422/485
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Electrostatic Discharge (ESD) protection	15 kV
USB 2.0 ports quantity	0
Supported network protocols	ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, RFC2217
Built-in processor	Lantronix DSTNI-EX
Processor frequency	48 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP
Flash memory	2 MB
RAM capacity	0.256 MB
LED indicators	LAN, Y
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	9 - 30 V

Weight and Dimensions

Weight	400 g
Dimensions (WxDxH)	72 x 23 x 95 mm