Lantronix UDS2100 User Manual

UDS2100 Device Server User Guide 8
List of Figures
Figure 2-1. Serial Tunneling Example______________________________________ 12
Figure 2-2. Direct TCP/IP or Redirector Configuration _________________________ 12
Figure 2-3. Product Label _______________________________________________ 14
Figure 3-1. UDS2100 Connected to Serial Device and Network _________________ 15
Figure 5-1. Web Manager Login Window ___________________________________ 24
Figure 5-2. Lantronix Web Manager _______________________________________ 24
Figure 5-3. Network Settings ____________________________________________ 25
Figure 5-4. Server Settings ______________________________________________ 28
Figure 5-5. Hostlist Settings _____________________________________________ 30
Figure 5-6. Channel Serial Settings _______________________________________ 31
Figure 5-7. TCP Connection Settings ______________________________________ 33
Figure 5-8. UDP Connection Settings ______________________________________ 36
Figure 5-9. Apply Settings and Apply Defaults _______________________________ 38
Figure 6-1. MAC Address _______________________________________________ 40
Figure 6-2. Setup Menu Options __________________________________________ 40
Figure 7-1. Network Settings ____________________________________________ 42
Figure 8-1. Serial Port Settings ___________________________________________ 45
Figure 8-2. Interface Mode ______________________________________________ 46
Figure 8-3. Hostlist Option ______________________________________________ 51
Figure 9-1. Expert Settings ______________________________________________ 60
Figure 9-2. Security Settings _____________________________________________ 62
Figure 10-1. TFTP Window ______________________________________________ 67
Figure A-1. Diagnostic, Power, and Serial Port LEDs _________________________ 73
Figure B-1. Serial Interface ______________________________________________ 77
Figure B-2. DB9 Male RS232 Serial DTE Connector __________________________ 77
List of Tables
Table 7-1. BootP/DHCP/AutoIP options ____________________________________ 42
Table 7-2. Standard IP Network Netmasks _________________________________ 43
Table 8-1. Interface Mode Options ________________________________________ 46
Table 8-2. Common Interface Mode Settings ________________________________ 46
Table 8-3. Flow Control Options __________________________________________ 47
Table 8-4. Reserved Port Numbers _______________________________________ 47
Table 8-5. Connect Mode Options ________________________________________ 48
Table 8-6. Manual Connection Address Example ____________________________ 50
Table 8-7. Modem Mode Messages _______________________________________ 53
Table 8-8. Modem Mode Commands ______________________________________ 54
Table 8-9. Disconnect Mode Options ______________________________________ 56
Table 8-10. Flush Mode Options __________________________________________ 57
Table 8-11. Pack Control Options _________________________________________ 57
Table 10-1. Firmware Files ______________________________________________ 66
Table 11-1. Monitor Mode Commands _____________________________________ 70
Table 11-2. Command Response Codes ___________________________________ 71
Table A-1. UDS2100 LEDs ______________________________________________ 73
Table A-2. Problems and Error Messages __________________________________ 74
Table C-1. UDS2100 Technical Specifications _______________________________ 80

Lantronix UDS2100 Specifications

General

Isolation	1.5 kV
Certification	FCC, C/UL, CSA, VCCI, CE, TUV, CTick
Serial interface type	RS-232/422/485
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Electrostatic Discharge (ESD) protection	15 kV
USB 2.0 ports quantity	0
Supported network protocols	ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, RFC2217
Built-in processor	Lantronix DSTNI-EX
Processor frequency	48 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP
Flash memory	2 MB
RAM capacity	0.256 MB
LED indicators	LAN, Y
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	9 - 30 V

Weight and Dimensions

Weight	400 g
Dimensions (WxDxH)	72 x 23 x 95 mm