Lantronix UDS2100 User Manual

UDS2100 Device Server User Guide 77
Serial Port
The UDS2100 has two male DB9 DTE serial ports that support RS-232C/RS-422
(4-wire)/RS-485 (2-wire) serial standards up to 230 Kbps (and up to 921 Kbps if
high performance is selected).
Figure B-1. Serial Interface
Serial Connector Pinouts
The two Male DB9 DTE connectors provide an RS-232C/RS-422 (4-wire)/
RS-485 (2-wire) interface. The default serial port settings are 9600 baud, 8 bits,
no parity, 1 stop bit, no flow control.
Figure B-2. DB9 Male RS232 Serial DTE Connector
B: Connections and Pinouts
Male DB9 Serial Ports

Lantronix UDS2100 Specifications

General

Isolation	1.5 kV
Certification	FCC, C/UL, CSA, VCCI, CE, TUV, CTick
Serial interface type	RS-232/422/485
Serial ports quantity	2
Ethernet LAN data rates	10, 100 Mbit/s
Electrostatic Discharge (ESD) protection	15 kV
USB 2.0 ports quantity	0
Supported network protocols	ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, Telnet, TFTP, RFC2217
Built-in processor	Lantronix DSTNI-EX
Processor frequency	48 MHz
Compatible operating systems	Windows 98/ME/NT/2000/XP
Flash memory	2 MB
RAM capacity	0.256 MB
LED indicators	LAN, Y
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 60 °C
Operating relative humidity (H-H)	10 - 90 %
Input voltage	9 - 30 V

Weight and Dimensions

Weight	400 g
Dimensions (WxDxH)	72 x 23 x 95 mm