LeCroy WaveSurfer 400 Series User Manual

Maintenance
6.1 Introduction 6-1
6.1.1 Safety Precautions 6-1
6.1.2 Anti-static Precautions 6-1
6.3 Software Update Procedure 6-2
6.3.1 Installing New X-Stream DSO Application Software 6-2
6.3.2 Software End User License Agreement 6-3
6.3.3 Installing Device Drivers 6-7
6.3.4 Restoring the Operating System 6-8
6.3.5 Software Options 6-12
6.3.5.1 Changing Software Option Key 6-12
6.4 Board Exchange Procedure 6-13
6.4.1 PCI Board Exchange Procedure 6-13
6.4.2 Hard Drive Replacement Procedure 6-13
6.4.2.1 Required items 6-13
6.4.2.2 Preparation of host machine 6-13
6.4.2.3 Copying necessary files to share them through network 6-14
6.4.2.4 Creating a network-ready startup disk 6-15
6.4.2.5 Updating the hard disk (through a network) 6-18
6.4.2.6 Setup at the first startup 6-20
6.4.2.7 Validating the software 6-22
6.4.2.8 Initialization of panel setup 6-22
6.4.2.9 BIOS setting 6-23
6.5 Battery Exchange Procedure 6-26
6.6 Update BIOS 6-26
6.7 Equipment and Spare Parts Recommended for Service 6-27
6.7.1 Test Equipment Required 6-27
6.7.2 WaveSurfer Spare Parts 6-27
6.8 Service Menu 6-28
6.8.1 Accessing Service Menu 6-28
6.8.2 Mainframe Tests 6-29
6.8.2.1 Front Panel Test 6-29
6.9 Calibration Procedures 6-31
6.9.1 System Power Supply Calibration Procedure 6-31
6.9.2 Touch Screen Calibration Procedure 6-33
6.9.3 Front/ACQ System Adjustments 6-35
6.9.3.1 Internal reference voltage adjustment 6-35
6.9.3.2 Front end adjustment 6-36
6.9.3.3 TDC adjustment 6-39
6.9.3.4 Trigger delay adjustment 6-39
6.9.3.5 Trigger hysteresis adjustment 6-40
6.9.3.6 Event trigger delay adjustment 6-40
6.9.3.7 Odd path adjustment 6-41
6.9.3.8 Trigger analog time adjustment 6-42
6.9.3.9 Adjustment of time difference between channels 6-44
6.9.3.10 Speaker volume adjustment 6-45
6.10 Troubleshooting and Flow Charts 6-45
6.10.1 Introduction 6-45
Table of Contents v

LeCroy WaveSurfer 400 Series Specifications

General

Brand	LeCroy
Model	WaveSurfer 400 Series
Category	Test Equipment
Language	English