MMX8x4-HT series – User's Manual 123
Set the Phase Invert on Advanced Analog In
Command and Response
ç <invertphase_status>
æ <invertphase_status>
Parameters
<invertphase_status> true: Invert phase is on;
false: Invert phase is off.
Example
ç
æ
For more details about the Phase Invert feature see the Advanced Analog Input Channel section.
Set the Highpass Filter on Advanced Analog In
Command and Response
ç <hpf_status>
æ <hpf_status>
Example
ç
æ
<hpf_status>
true:
false: is off.
For more details about the Highpass Filter
see the Advanced Analog Input Channel section.
Set the Lowpass Filter on Advanced Analog In
Command and Response
ç <lpf_status>
æ <lpf_status>
Parameters
<lpf_status> true:
false: is off.
Example
ç
æ
see the Advanced Analog Input Channel section..
Command and Response
ç <eq_nr><gain_value>
æ <eq_nr><gain_value>
Parameters
Parameter values
<eq_nr>
PEQ1
PEQ2
PEQ3
PEQ4:
<gain_value>
down if necessary to match with the step value. For more details, see .
Example
ç
æ
For more details, see .
Embedded Audio Input Settings
INFO: Embedded audio input setting commands are available in MMX8x4-HT400MC and
MMX8x4-HT420M model. The settings refer to the chosen embedded audio channel in the audio mixer.
See more details in Audio Interface section.
Set the Audio Channel
Command and Response
ç <in><a_v>
æ <in><a_v>
Parameters
<a_v> A: Embed from AUX audio
V: HDMI audio
Example
ç
æ
Embedded analog audio of I5 port is chosen.
ATTENTION! This setting affects to the crosspoint state.
To Next Page
Loading...
Need help?
General
