3. Front Panel Control MMX8x4-HT series – User's Manual 21
System Settings Menu
Network Submenu #dhcp #ipaddress #network
The parameters of the network connection can be set in this submenu. IP, Subnet,
Gateway and MAC parameters show the current settings. If the DHCP option is
disabled, three more parameters are listed which can be set for a static IP address:
▪ Static IP,
▪ Static Subnet,
▪ Static Gateway.
ATTENTION! If you change the network settings, always press the Save option under Network menu (not
only in the submenu of the parameter) to apply the new settings.
RS-232 Submenu #rs232 #rs-232
port and enter to see the settings.
Adjustable parameters of the serial ports:
▪
▪
▪
Front Panel Submenu
The following front panel-related parameters can be set in this submenu:
▪ Display Backlight (1-10)
▪
Device Info Submenu #rmwareversion
In this submenu you can check basic information about the matrix unit:
▪ Serial number
▪
▪
Factory Defaults Submenu #factory
Factory default settings will be restored by choosing Yes.
Reset Device Submenu #restart
There is a possibility to reset the device.
Bootload Mode Submenu #bootload
Special function for entering the bootload mode.
To Next Page
Loading...
Need help?
General
