MMX8x4-HT series – User's Manual 91
Upload the Settings to a Device (Restore)
WARNING! Please note that the settings will be permanently overwritten with the restored parameters
in the device. Withdrawal is not possible.
ATTENTION!
device as the destination device.
The Restoring Process
Step 1. Select the SettingsBackup tab from the menu.
Step 2. Click on the Choose le button on the right panel and browse
Step 3.
settings can be restored.
Step 4. Choose IP settings
keep actual settings, set it manually in a dialog box or apply DHCP.
Step 5. Select the desired MAC lter settings to be applied in the device. See more information about this
feature in the MAC Filter Allowlist section.
Step 6. Press the Start restore process button and click on the Yes button when asked.
Step 7.
Create and Restore Backups from the Device Memory
▪ without protection:
▪ with protection: it can be protected by a password to apply or delete the configuration.
The presets can be used for the macros as well, please see the Macros section.
WARNING! Loading factory default settings will erase all presets in the device memory!
Deleting the selected
to the selected slot without
protection
to the selected slot with a
password
Saving the selected
To Next Page
Loading...
Need help?
General
