50
3.1.2 Power on
Before switching power on, check the following.
"
""
"
Installation check
Make sure that the inverter is installed correctly in a proper location. (Refer to page
12.)
"
""
"
Wiring check
Make sure that the main and control circuits are wired correctly.
Make sure that the options and peripheral devices are selected and connected
correctly. (Refer to page 14.)
"
Switch power on.
Power-on is complete if the POWER lamp is lit to give a correct indication and the
ALARM lamp is off.
To Next Page
Loading...
Need help?
General
