Mitsubishi FR-E 500 User Manual

52
3.2.2 Control panel mode is changed by pressing the
MODE
key
"
Monitoring mode
"
Frequency setting
mode (Note)
"
Parameter setting mode
MODE SET REV
STOP
RESET
FWD
Hz
PU
MON
PU
Hz
PU
MODE SET REV
STOP
RESET
FWD
MODE SET REV
STOP
RESET
FWD
"
Operating mode
PU
MODE SET REV
STOP
RESET
FWD
"
Help mode
PU
MODE SET REV
STOP
RESET
FWD
MODE MODE
MODE
MODE
MODE
(Note) The frequency setting mode is displayed only in the PU operation mode.
3.2.3 Monitorin
g
!
Operation command indications given while a monitor display is being provided
EXT is lit to indicate external operation.
PU is lit to indicate PU operation.
Both EXT and PU are lit to indicate combined operation.
!
The monitor display can also be changed during operation.
"
Frequency monitor
"
Alarm monitor
Alarm absent
SETSET
*2
To 3.2.4 Frequency setting mode (Note3)
SET
MODE
*1
SET
Hz
MON
EXT
PU
MODE SET REV
STOP
RESET
FWD
Alarm present
SET
"
Voltage monitor
*1
SET
PU
MON
EXT
"
Current monitor
*1
SET
PU
MON
EXT
A
SET
Note:1. Hold down the
SET
key marked *1 for more than 1.5 seconds to change the
current monitor to the power-on monitor.
2. Hold down the
SET
key marked *2 for more than 1.5 seconds to display four
errors including the most recent one.
3. To the parameter setting mode when in the external operation mode.

Mitsubishi FR-E 500 Specifications

General

Brand	Mitsubishi
Model	FR-E 500
Category	Inverter
Language	English