Moog DigiPack III J141-215 User Manual

© MOOG 2019
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
17
MRJ06301
1-5-12. CONTAMINATION CONTROL
Long term trouble free operation with a minimum of unplanned
down time and adequate oil contamination control are linked very
closely. It is very important to maintain adequate oil cleanliness.
The addition of a system contamination control filter will control
oil contamination levels at minimum expense.
The filter should be located such that the flow through the filter is
relatively constant and at a low pressure. The junction of the re-
turn lines from the tooling actuator and the system relief valve is
a suitable location.
Currently, MOOG does not sell filters. Please purchase
directly from the filter manufacturer.
Figure 1-15 Flow Pressure Filter

Moog DigiPack III J141-215 Specifications

General

Brand	Moog
Model	DigiPack III J141-215
Category	Controller
Language	English