Motorola APX 8000 User Manual

If the site does not exist, the display shows <Site Alias>does not exist.
5 To return to the Home screen, press the Menu Select button directly below Exit.
The SSA Alert for the designated site stops.
7.28.6
Stopping SSA Notification of a Single Site by Manual Entry
Procedure:
1
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to [SiteID Entry] and press the Menu Select button directly below Edit.
The display shows the Enter SiteID screen.
5 Key in the required Site ID and press the Menu Select button directly below Send.
One of the following scenarios occur:
• If a wrong Site ID is entered, the display shows Invalid ID and prompts to enter the Site
ID again.
• If a correct Site ID is entered, the display shows Sending req.
• If the request is successful, the display shows Req successful.
• If the single site is not available, the display shows <Site ID> not available.
• If the single site does not exist, the display shows <Site ID> does not exist.
6 To return to the Home screen, press the Menu Select button directly below Exit.
The SSA Alert for the designated site stops.
7.28.7
Stopping SSA Notification of All Sites
Procedure:
1
or to SSA.
2 Press the Menu Select button directly below SSA.
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel.
The display shows the Select Site screen.
4 or to [All Sites] and press the Menu Select button directly below Send.
The display shows Sending req.
MN001425A01-AW
Chapter 7 : Advanced Features
127

Motorola APX 8000 Specifications

General

Water Resistance	IP68
P25 Phase	P25 Phase 1 and Phase 2
GPS	Yes
Channels	3000 channels
Display	Full-color LCD
Encryption	AES, DES
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Bluetooth	Bluetooth 4.0