The speaker unmutes.
Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
2 Press and hold the PTT button to talk. Release the PTT button to listen.
7.2.1.2
Making a Selective Call
Prerequisites: Your radio must be preprogrammed for you to use this feature.
Procedure:
1 Perform one of the following actions:
• To access this feature by using a preprogrammed button, press the preprogrammed
Selective Call button to dial the preprogrammed ID. Proceed to step 3.
•
or to Call, and press the Menu Select button directly below Call.
The display shows the last transmitted or received ID.
2 To select the required ID, perform one of the following actions:
• Press the Menu Select button directly below Cnts to scroll through and select the required
ID.
• Press the Menu Select button directly below LNum to go to the last number dialed.
•
or to the required ID.
• Use the keypad to enter the required ID.
3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
4 Press and hold the PTT button to start the Selective Call.
The display shows the ID of the target radio.
5 Release the PTT button to listen.
6 Press to return to the Home screen.
7.2.2
Talkgroup Call Feature (Conventional Only)
This feature allows you to define a group of conventional system users so that they can share the use
of a conventional channel.
NOTE: Encryption keys are associated to talkgroups. When talkgroups are associated,
encryption keys are changed by changing the active talkgroup. See Secure Operations on page
96 for more information.
7.2.2.1
Selecting a Talkgroup
Procedure:
1
or to Tgrp and press the Menu Select button directly below Tgrp.
The display shows the last talkgroup that was selected and stored.
MN001425A01-AW
Chapter 7 : Advanced Features
52
To Next Page
Loading...
Need help?
General
