Motorola APX 8000 User Manual

Chapter 4
Status Indicators
This section explains the status indicators of the radio.
4.1
Battery Charge Status
Your radio indicates the battery charge status through LED, sounds, and the battery icon on the
display. You can also check the battery charge status by using the menu entry.
Battery Protection is activated when the battery is low or operating in extremely low temperatures to
extend radio communication. Features such as Wi-Fi and LTE are temporarily suspended.
When the Battery Protection Mode is active, you receive a notification. You can dismiss the Battery
Protect Mode notification by tapping Close on the dialog box. The top display will switch between
zones or channel information and Battery Protect Mode string.
Battery Protection Mode will end when the battery level or the temperature has returned to normal. A
notification will appear on the front display indicating that LTE and Wi-Fi services have been restored.
You can press Close to dismiss the notification or the dialog box will close itself after three minutes.
The top display notification will also disappear.
4.1.1
Fuel Gauge Icons
The fuel gauge icon indicates the battery level of your radio.
Gauge Battery Charge
Top Display:
76% to 100% full
1
Top Display:
51% to 75%
1
Top Display:
26% to 50%
1
1
This is applicable for IMPRES battery operation only.
MN001425A01-AW
Status Indicators
27

Motorola APX 8000 Specifications

General

Water Resistance	IP68
P25 Phase	P25 Phase 1 and Phase 2
GPS	Yes
Channels	3000 channels
Display	Full-color LCD
Encryption	AES, DES
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Bluetooth	Bluetooth 4.0