3 or to View and press the Menu Select button directly below Sel .
The display shows all the numbers associated with the entry.
7.5
Scan Lists
Scan lists are created and assigned to individual channels or groups. Your radio scans for voice
activity by cycling through the channel or group. The sequence of scan is as specified in the scan list
for the current channel or group.
Your radio supports different types of Scan Lists:
• Conventional Scan List
• Talkgroup Scan List
• Trunking Priority Monitor Scan List
Refer to a qualified radio technician for the maximum number of Scan Lists to be programmed in your
radio.
7.5.1
Intelligent Priority Scan
This feature allows you to add or delete conventional channels and trunking talkgroups from multiple
systems into the priority scan lists.
When the radio locks onto a channel in the Intelligent Priority Scan list, the radio scans for higher
priority member within the same Trunking or Conventional system.
7.5.2
Viewing a Scan List
Procedure:
1
or to ScnL and press the Menu Select button directly below ScnL .
2 or to view the members on the list.
3 Press
to exit the current display and return to the Home screen.
7.5.3
Editing the Scan List
When and where to use: This feature allows you to change scan list members and priorities.
Procedure:
1 Perform one of the following actions:
• Long press the preprogrammed Scan List Programming button (side button).
• Move the preprogrammed Scan List Programming switch to programming position.
• or to ScnL then press the Menu Select button directly below ScnL .
The display shows the lists that can be changed.
2 or to the entry you want to edit.
3 Perform one of the following actions:
MN001425A01-AW
Chapter 7 : Advanced Features
63
To Next Page
Loading...
Need help?
General
