Motorola APX 8000 User Manual

3 Perform one of the following actions:
• or to scroll through the address list and select the required address.
• or to [Other Recpnt] and press the Menu Select button below Edit. When a
blinking cursor appears in the Enter Address screen, use the keypad to type the address
entry.
4 Press the Menu Select button below Send or the PTT button to send the message.
The display shows the Send Message screen and Sending msg.
NOTE: Press the Menu Select button directly below Back at any time to return to the
previous screen.
You can append a priority status and/or a request reply to your message. See Priority
Status and Request Reply for New Text Messages on page 87 for more information.
7.16.4.12
Deleting a Text Message
Procedure:
1 From the Inbox, Draft, or Sent screen,
or to scroll through the messages.
2 Press the Menu Select button directly below Del to delete the current message.
7.16.4.13
Deleting All Text Messages
Procedure:
1 Perform one of the following actions:
• Press the Data Feature button or the preprogrammed TMS Feature button to access the
Messaging feature screen.
•
or to TMS and press the Menu Select button directly below TMS to access the TMS feature
screen.
2 or to Inbox or Sent then press the Menu Select button below Clr to select all
messages in the selected folder.
The display shows Del all?.
3 Perform one of the following actions:
• Press the Menu Select button directly below Yes to delete all the messages in the selected
folder.
• Press the Menu Select button directly below No to return to the main TMS feature screen.
7.17
ASTRO 25 Advanced Messaging Solution
This feature only supports Model 3.5 and Model 2.5.
MN001425A01-AW
Chapter 7 : Advanced Features
92

Motorola APX 8000 Specifications

General

Water Resistance	IP68
P25 Phase	P25 Phase 1 and Phase 2
GPS	Yes
Channels	3000 channels
Display	Full-color LCD
Encryption	AES, DES
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Bluetooth	Bluetooth 4.0