Motorola APX 8000 User Manual

7.7.1
Receiving a Call Alert Page
When and where to use: When you receive a Call Alert page, you hear four repeating alert tones and
the LED blinks green. The call received icons blinks and the display shows Page received.
Procedure:
Press any button to clear the Call Alert page.
See Making a Talkgroup Call on page 43 or Making a Private Call (Trunking Only) on page 43 for more
information on returning the call.
7.7.2
Sending a Call Alert Page
When and where to use:
Do one of the following to send a call alert page:
NOTE: If the feature inactivity timer is enabled, your radio automatically exits the feature when
your radio is left idle long enough for the time to expire. You hear the Menu Inactive Exit Tone
upon feature exit.
Procedure:
• Sending a call alert page using the preprogrammed Call Alert Paging button:
a. Press the preprogrammed Call Alert Paging button to send a page to the preprogrammed
ID.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you hear a tone and the display shows Ack
received. The radio returns to the Home screen.
If the call alert page is not acknowledged, you hear a low tone and the display shows No
acknowledge. Press the Menu Select button directly below Ok to return to the main screen
for Contacts.
• Sending a call alert page using the radio menu Page :
a.
or to Page .
b. Press the Menu Select button directly below Page .
c. Press the Menu Select button directly below Cnts to view the required ID, or to the
required ID, or use the keypad to enter the required ID.
d. Press the PTT button to send the page.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you hear a tone and the display shows Ack
received. The radio returns to the Home screen.
If the call alert page is not acknowledged, you hear a low tone and the display shows No
acknowledge. Press the Menu Select button directly below Ok to return to the main screen
of Contacts.
• Sending a call alert page using the radio menu Call :
MN001425A01-AW
Chapter 7 : Advanced Features
67

Motorola APX 8000 Specifications

General

Water Resistance	IP68
P25 Phase	P25 Phase 1 and Phase 2
GPS	Yes
Channels	3000 channels
Display	Full-color LCD
Encryption	AES, DES
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Bluetooth	Bluetooth 4.0