23
Getting Started
Receiving an Emergency Group Call during a Call
The MTM800 receives the Emergency Group Call, drops the
on-going non-emergency voice call, and connects to the
Emergency Group Call.
Receiving a Private PPC during a Call
If configured by your Service Provider, the MTM800 receives
the PPC, drops the on-going, non-emergency, lower priority
voice call, and connects to the higher priority private call.
A PPC with lower or equal priority, will be dropped without
any indication to the called user and will enter the missed call
list.
A PPC with emergency call priority will be displayed on the
screen as “
Emergency” (instead of “Priority”).
Half-duplex Private PPC Received
Full-duplex Private PPC Received
Broadcast Call
The Broadcast Group Call (also called Site
Wide Call) is a high-priority group call from
the console operator (or dispatcher) to all
terminal users located at one or more
<Any> in Use
Rescue 1
Police
Back
Optns
Reject
Private in use
Priority
Press
PTT
David
Prvt Priority
<Any> in Use
Press
any key
<Any> in Use
Reject
David
Prvt Priority
Private in use
Priority
Group In Use
Broadcast
Status
6815321H01_KOR.book Page 23 Thursday, November 13, 2008 8:06 AM
To Next Page
Loading...
Need help?
General