26
the MTM800 effectively unnoticeable even in a silent and
dark environment.
To Enter the Covert Mode:
• Press the Cover Mode one-touch button (if programmed by
your Service Provider), or
• Select Covert Mode in the Security menu (refer to
page 83).
Local Area Service
This mode, which is also called Fallback Mode, allows more
than one user from the same site to communicate when the
link between the site and network central controller fails.
Entering and exiting Local Area Service (that is, returning to
System Wide Services) is done automatically.
Entering Local Area Service
When the MTM800 receives a Local Area Service indication
from the system, the following occurs:
• the MTM800 sounds a tone
• the display shows the “Local Area Service” message.
• any call in progress is dropped upon entering Local Area
Service mode.
If configured by your service provider, this message/alert will
periodically repeater to remind you the terminal is still
operating in Local Area Service mode.
The following features are available while the MTM800 is in
Local Area Service:
• Registration
• Attachment
• Group Call
• Emergency Group Call
• Emergency Alarm
6815321H01_KOR.book Page 26 Thursday, November 13, 2008 8:06 AM
To Next Page
Loading...
Need help?
General