91
The Menu
Network ( 6)
To enter the sub-menu, press
–6Networks.
This sub-menu allows you to select the
network your MTM800 will be registered to,
and what mode it operates on.
Selecting Your Network ( 6 1)
This sub-menu allows you to select the network your terminal
will be registered to.
Selecting Home Only Network Registration ( 6 1 1)
To enter the sub-menu, press
– 6 Networks – 1 Networks Sel –
1 Home Only
.
Selecting this option causes your MTM800
to recognise the first network on the allowed Network List
only and to register to it.
Using the Select Net Option Registration ( 6 1 2)
To enter the sub-menu,
press
–6Networks–1 Networks Sel–2 Select Net.
If configured by your service provider, this option allows you
to select manually the network from the allowed Network List
you want your MTM800 to be registered to.
The list of the allowed networks is displayed.
Scroll to the desired network and press
Set.
The display shows XXX Selected. The XXX stands for the
name of the network selected.
After a few seconds the display returns to the Network sub-
menu.
It is up to your service provider to ensure your own terminal
identity is allowed to register on other networks in your list.
Some talkgroups may not be available on other networks.
Menu
Menu
2 Oper. Mode
Back
Ok
1 Networks Sel
3 TXI Mode
Menu
Menu
1 Home Only
Back
Set
2 Select Net
Menu
Menu
Menu
6815321H01_KOR.book Page 91 Thursday, November 13, 2008 8:06 AM
To Next Page
Loading...
Need help?
General