MTS Systems FlexTest GT User Manual

MTS 793 Controller Hardware
FlexTest GT Controller Connections
150
Miscellaneous Conditioner Output Connections
The following table shows connector assignments for various MTS
products you can use with your the Model 493.10 Chassis.
Conditioning Sensors with Other MTS Products
MTS P
RODUCT SENSOR OUTPUT
Model 408.81 Testing Panel/
Model 408.82 DC Conditioner
Sensor output is available at the rear-panel connector
J201 or J202.
Model 409.81C Temperature Controller
Temperature output (via an analog signal) is available
at rear-panel connector J1.
Model 448.82/85 Test Controller with
Model 448.21/22 AC and DC Conditioners
Sensor output is available at rear-panel connector
J335.
Ensure sensor conditioners are set as follows:
X1: 2&3
X2: 2&3
Model 458.10/20 MicroConsole
®
with
Model 458.11/12/13/14 AC and DC
Controllers
Sensor output is available at the MicroConsole rear-
panel connector Jx03. Connector Jx03 represents the
module location (J100–J600).
MicroConsole jumper Jx00 should be set to 1&2
(standard setting).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

MTS Systems FlexTest GT Specifications

General

Brand	MTS Systems
Model	FlexTest GT
Category	Controller
Language	English