FlexTest GT Controllers
MTS 793 Controller Hardware Introduction
21
Front panel The Model 493.10 Chassis front panel has twelve slots; ten VMEbus
slots and two slots (A and B) which are reserved.
Rear panel The rear panel of the chassis has twelve transition bus slots. Two of
these rear panel slots (slots A and B) can not be used with powered
MTS transition modules. The chassis can be rack mounted or used in a
floor standing configuration.
VMEbus modules The chassis has ten VMEbus slots that support a variety of MTS
VMEbus plug-in modules.
• The chassis requires at least one processor module. The processor
module provides the processing power to manage the other plug-
in modules that make up the controller.
• The chassis can have up to eight I/O Carrier modules. Each I/O
Carrier module supports up to four mezzanine cards.
• An optional Global Resource (GRES) module provides several
connections to communicate with external devices such as a
remote station control module, temperature controller, and other
devices.
Transition bus Transition modules are panels plugged into the transition bus located
in the rear of the chassis. Each transition module allows external
devices to interface with the chassis. Transition modules provide the
following:
• Hydraulic control connections
• Station control connections
• Analog input and output connections
• Digital input and output connections
• Serial connections
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
