Configure a G-240W-G indoor ONT
132
7368 ISAM ONT G-240W-G Product Guide
3FE-47555-AAAA-TCZZA Issue: 01
3 Click Save.
4 STOP. This procedure is complete.
Procedure 38 NTP configuration
1 Select Application > NTP from the top-level menu in the GPON Home Gateway window, as
shown in Figure 57.
Figure 57 NTP window
Table 48 describes the fields in the NTP window.
Table 48 NTP parameters
Field Description
Enable NTP Service Select this checkbox to enable NTP service
Current Time Enter the current local date and time
Primary Time Server Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
Secondary Time Server Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
(1 of 2)
Release 05.08.01a | August 2018 | Edition 01
To Next Page
Loading...
Need help?
General
