Configure a G-240W-G indoor ONT
160
7368 ISAM ONT G-240W-G Product Guide
3FE-47555-AAAA-TCZZA Issue: 01
3 Click Save.
4 STOP. This procedure is complete.
Procedure 60 LOID configuration
1 Select Maintenance > LOID Config from the top-level menu in the GPON Home Gateway
window, as shown in Figure 78.
Figure 78 LOID configuration window
2 Enter the LOID.
3 Enter the password, if applicable.
4 Click Save/Apply.
5 STOP. This procedure is complete.
Release 05.08.01a | August 2018 | Edition 01
To Next Page
Loading...
Need help?
General
