Configure a Beacon G6
Network configuration
Configuring Upstream (US) Classifier
Figure 7-27 US Classifier - Classifier page
5
Configure the following parameters:
Table 7-20 US Classifier - Classifier parameters
Select an interface from the list; for example, None, LAN, 2.4G SSID, or 5G SSID.
The option None indicates that all interfaces are selected.
Select the toggle button to enter a source MAC address.
Select the toggle button to enter a source IP address.
Select the toggle button to enter a source port.
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 111
To Next Page
Loading...
Need help?
General
