ANSI CPE safety guidelines
Safety instructions
WARNING
Equipment Damage
Possibility of equipment damage.
Possibility of data loss.
The Warning box indicates that the described activity or situation may, or will, cause equipment
damage, loss of data, or serious performance problems. It identifies a possible equipment-
damaging situation or provides essential information to avoid the degradation of system operations
or data.
Do not proceed beyond a warning until the indicated conditions are fully understood and met.
The following is an example of the Caution box.
CAUTION
Service Disruption
Possibility of service interruption.
Service interruption.
The Caution box indicates that the described activity or situation may, or will, cause service
interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood and met.
The following is an example of the Note box.
Note: Information of special interest.
The Note box provides information that assists the personnel working with devices. It does not
provide safety-related instructions.
4.2.2 Safety-related labels
The customer premises equipment is labeled with specific safety compliance information and
instructions that are related to a variant of the CPE. Observe the instructions on the safety labels.
The following table provides examples of the text in the various CPE safety labels.
Table 4-1 Safety labels
Communication service equipment US listed.
Caution: This assembly contains electrostatic sensitive device.
Tested to comply with FCC standards for home or office use.
Figure 4-1, “Sample safety label” (p. 33) shows a sample safety label located on the bottom of the
Beacon G6.
Use subject to agreed restrictions on disclosure and use.
32 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
Need help?
General
