ETSI CPE safety guidelines
Safety standards compliance
WARNING
Equipment Damage
Possibility of equipment damage.
Possibility of data loss.
The Warning instruction indicates that the described activity or situation may, or will, cause
equipment damage, loss of data, or serious performance problems. It identifies a possible
equipment-damaging situation or provides essential information to avoid the degradation of system
operations or data.
Do not proceed beyond a warning until the indicated conditions are fully understood and met.
The following is an example of the Caution instruction.
CAUTION
Service Disruption
Possibility of service interruption.
Service interruption.
The Caution instruction indicates that the described activity or situation may, or will, cause service
interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood and met.
The following is an example of the Note instruction.
Note: Information of special interest.
The Note box provides information that assists the personnel working with devices. It does not
provide safety-related instructions.
2.2.2 Safety-related labels
The WiFi Beacon is labeled with the specific safety instructions and compliance information that is
related to a variant of the WiFi Beacon. Observe the instructions on the safety labels.
Table 2-1, “Safety labels” (p. 22) provides sample safety labels.
Table 2-1 Safety labels
Indicates compliance to the European Council Directives including EN60950-1 safety
Caution: This assembly contains an electrostatic sensitive device.
2.3 Safety standards compliance
This section describes the WiFi Beacon compliance with the European
Use subject to agreed restrictions on disclosure and use.
22 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
Need help?
General
