Configure a Beacon G6
Application configuration
Configuring port forwarding
7.40 Configuring port forwarding
1
Click Application→ Port forwarding in the left pane. The Port forwarding page displays.
Figure 7-41 Port forwarding page
2
Configure the following parameters:
Table 7-28 Port forwarding parameters
Select an application name from the list.
The default is Custom Settings.
Enter the WAN port range.
Enter the LAN port range.
Select a connected device from the list and enter the associated IP address.
The default is Custom Settings.
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 131
To Next Page
Loading...
Need help?
General
