Configure a Beacon G6
Security configuration
Configuring family profiles
2
Configure the following parameters:
Table 7-35 ALG Configuration parameters
Select the toggle button next to the protocol name to enable the protocols to be supported by ALG:
• FTP
• TFTP
• SIP
• H323
• RTSP
• L2TP
• IPSEC
• PPTP
3
Click Save .
4
Configure the following parameters:
Table 7-36 DMZ Configuration parameters
Select a WAN connection from the list.
Select the toggle button to enable DMZ on the WAN connection.
Select Custom Settings and enter the DMZ IP address or select the IP address of a
connected device from the list.
5
Click Save.
END OF STEPS
7.49 Configuring family profiles
1
Click Security→ Family profiles (Parental control) from the left pane. The Family profiles
(Parental control) page displays.
Use subject to agreed restrictions on disclosure and use.
142 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
Need help?
General
