Configure a Beacon G6
Viewing device information and status
Viewing WAN IPv6 status
Table 7-3 WAN Status parameters (continued)
Displays whether the WAN link is connected or disconnected.
Displays the netmask address.
Displays the gateway address.
Enter the primary domain name server address.
Enter the secondary domain name server address.
Displays whether the Ethernet link is up or down.
Displays the number of packets transmitted.
Displays the number of packets received.
Displays the number of transmitted packets dropped.
Displays the number of received packets dropped.
Displays the number of error packets.
END OF STEPS
7.10 Viewing WAN IPv6 status
1
Click Status→WAN status IPv6 in the left pane. The WAN status IPv6 page displays the
following information.
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 73