Configure a Beacon G6
Security configuration
Configuring the IP filter
4
Configure the following parameters:
Table 7-32 MAC filter - WiFi SSID parameters
Select the MAC filter mode from the list:
• Blocked
• Allowed
Select the SSID from the list.
Select the toggle button to enable the MAC filter.
Select a MAC address from the list or enter the MAC address in the text field.
5
Click Save.
END OF STEPS
7.46 Configuring the IP filter
1
Click Security→ IP filter in the left pane. The IP filter page displays.
Use subject to agreed restrictions on disclosure and use.
138 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
Need help?
General
