Configure a Beacon G6
GUI overview
Overview
GUI overview
7.2 Overview
7.2.1 Purpose
This section provides an overview of the Beacon G6 WebGUI.
7.2.2 Contents
7.2 Overview
7.3 General configuration
7.4 Logging in to the web-based GUI
7.5 Viewing overview information
7.3 General configuration
Refer to the configuration information provided with your OLT for the software configuration
procedure for a Beacon G6.
For HTTP/ HTPPs configuration procedures, refer to the Nokia ONT Configuration, Management,
and Troubleshooting Guide.
7.4 Logging in to the web-based GUI
1
Open a web browser and enter the IP address of the Beacon in the address bar.
The Login page displays.
Figure 7-1 Login page
Use subject to agreed restrictions on disclosure and use.
62 3FE-49949-AAAA-TCZZA