Oki MC562w Maintenance Manual

44952001TH Rev.2
5-28
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.4.9 Print counter display
The print counter display is used for viewing print counter values.
1. Enter the self-diagnostic mode and, until PRINTER STATUS appears, press [2]
or [8] ([2] displays the next test option and [8]
displays the preceding test option).
Then press the [6] button.
2. Press [2] or [8], and each count is printed (the [
] or [#] button is disabled).
3. Press [4] to end the option (the state for step 1 is restored).
Upper display Lower display Format Unit Detail
K-
IMPRESSIONS
********IMAGES Decimal Images Each display the number of a
color's pages printed.
Y-
IMPRESSIONS
********IMAGES Decimal Images
M-
IMPRESSIONS
********IMAGES Decimal Images
C-
IMPRESSIONS
********IMAGES Decimal Images
TOTAL SHEET
CNT
********COUNTS Decimal Prints Displays the total number of pages
printed.
5.4.10 Factory/Shipping mode setting
The Factory/Shipping mode setting is used for switching from the Factory to Shipping mode.
1. Enter the self-diagnostic mode and, until the following message appears, press [2]
or [8].
FACTORY MODE SET
2. Press [2] or [8], and the following message appears. Press [2] or [8] until an
option to set (refer to the table shown below) appears.
FACTORY MODE
SHIPPING MODE *
3. By pressing the [6] button with the option on the display, a setting for the option
can be selected.
4. Press the [6] button with the display showing the setting to set. The setting is
stored in the EEPROM. The state for step 2 is restored.
5. Repeat steps 2 through 4 when necessary.
6. Press [4] to end the option (the state for step 1 is restored).
Display Settings Function
FACTORY
MODE
FACTORY MODE Establishes the Factory mode (a fuse-cut disabling
mode).
SHIPPING MODE Deselects the Factory mode to enable the fuse-cut
function.
FUSE INTACT
Note: Six
asterisks
(******)
identifies
IN TAC T or
BLOWN.
BELT UNIT ****** Displays the fuse status of the transfer belt unit.
FUSE UNIT ****** Displays the fuse status of the fuser.
ID UN IT ****** Displays the fuse status of an image drum unit.

Oki MC562w Specifications

General

Brand	Oki
Model	MC562w
Category	All in One Printer
Language	English