1
Introduction
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
Introduction
Thank you for purchasing an FH series/FZ5 series Sensor Controller.
This manual contains information that is necessary to use the FH series/FZ5 series Sensor Controller.
Please read this manual and make sure you understand the functionality and performance of the FH
series/FZ5 series Sensor Controller before you attempt to use it in a control system.
Keep this manual in a safe place where it will be available for reference during operation.
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
This manual covers the following products.
•FH-1
•FH-1-
•FH-3
•FH-3-
•FH-L
•FH-L-
• FZ5-6
• FZ5-6-
• FZ5-11
• FZ5-11-
• FZ5-L35
• FZ5-L35-
Part of the specifications and restrictions for the FH/FZ5-series are given in other manuals.
Refer to Relevant Manuals on page 2 and Related Manuals on page 26.
Intended Audience
Applicable Products
To Next Page
Loading...
Need help?
General
