Omron NJ Series Startup Guide

Related Manuals
The following are the manuals related to this manual. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NJ-series CPU Unit
Hardware User's Manual
W500
NJ501-££££
NJ301-££££
NJ101-££££
Learning the basic
specifications of the
NJ-series CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provided.
An introduction to the entire NJ-series
system is provided along with the follow-
ing information on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ/NX-series CPU Unit
Software User’
s Manual
W501
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning how to pro-
gram and set up an
NJ/NX-series CPU
Unit.
Mainly software infor-
mation is provided.
The following information is provided on a
Controller built with an NJ/NX-series CPU
Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3
language specifications
NJ/NX-series Instructions
Reference Manual
W502
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning detailed
specifications on the
basic instructions of
an NJ/NX-series
CPU Unit.
The instructions in the instruction set (IEC
61
131-3 specifications) are described.
NJ/NX-series CPU Unit
Motion Control User’
s Manual
W507
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about mo-
tion control settings
and programming
concepts.
The settings and operation of the CPU
Unit and programming concepts for mo-
tion control are described.
NJ/NX-series
Motion Control Instructions
Reference Manual
W508
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about the
specifications of the
motion control in-
structions.
The motion control instructions are descri-
bed.
NJ/NX-series
CPU Unit
Built-in EtherCA
T
®
Port
User
’s Manual
W505
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Using the built-in
EtherCA
T port on an
NJ/NX-series CPU
Unit.
Information on the built-in EtherCAT port
is provided.
This manual provides an introduction and
provides information on the configuration,
features, and setup.
NJ/NX-series
CPU Unit
Built-in EtherNet/IP
™
Port
User’
s Manual
W506
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Using the built-in
EtherNet/IP port on
an NJ/NX-series
CPU Unit.
Information on the built-in EtherNet/IP port
is provided.
Information is provided on the basic setup,
tag data links, and other features.
NJ-series
Robot Integrated CPU Unit
User
’
s Manual
O037
NJ501-R£££
Using the NJ-series
Robot Integrated
CPU Unit.
Describes the settings and operation of
the CPU Unit and programming concepts
for OMRON robot control.
Related Manuals
22
NJ-series Robot Integrated System Startup Guide (O049)

Omron NJ Series Specifications

General

Brand	Omron
Model	NJ Series
Category	Controller
Language	English