Omron NX-SL3500 User Manual

5-1
Configuration and Setup Procedures
This section describes the procedures for using the Sysmac Studio to configure and set up the safety
control system. Make the settings in the following order.
1 Configure and set up the safety control system.
2 Set up safety process data communications.
3 Select the connected input devices and output devices to set up the input terminals and output
terminals.
4 Register the device variables
5 Expose the variables to the standard controller.
5 System Configuration and Setup
5 - 2
NX-series Safety Control Unit User's Manual (Z930)

Omron NX-SL3500 Specifications

General

Brand	Omron
Model	NX-SL3500
Category	Controller
Language	English