Omron NX-SL3500 User Manual

Regulations and Standards
The NX-series Safety Control Units are certified for the following standards.
Certification body Standards
TÜV Rheinland
*1
• EN ISO 13849-1: 2015
• EN ISO 13849-2: 2012
• IEC 61508 parts 1-7: 2010
• IEC/EN 62061:2005+A1: 2013+A2:2015
• IEC/EN 61
131-2: 2007
• IEC/EN 60204-1: 2016
• IEC 61326-3-1: 2017
• IEC 61131-6: 2012
UL NRAQ (UL61010-1, and UL 61010-2-201)
NRAG (ANSI/ISA 12.12.01)
NRAQ7 (CSA C22.2 No. 61010-1, and CSA C22.2 No. 61010-2-201)
FSPC (IEC 61508 and EN ISO 13849)
*1. The FSoE protocol was certified for applications in which OMRON FSoE devices are connected to each oth-
er.
For compatibility with FSoE devices other than OMRON FSoE devices, the customer must validate FSoE
communications.
The NX-series Safety Control Units allow you to build a safety control system that meets the following
standards.
• Requirements for SIL 3 (Safety Integrity Level 3) in IEC 61508, EN 62061, (Functional Safety of
Electrical/Electronic/Programmable Electronic Safety-related Systems)
• Requirements for PLe (Performance Level e) and for safety category 4 in EN ISO13849-1
The NX-series Safety Control Units are also registered for RCM, EAC, and KC compliance.
Conformance to EU Directives
Applicable Directives
• EMC Directives
• Low Voltage Directive
Concepts
l
EMC Directives
OMRON devices that comply with EU Directives also conform to the related EMC standards so that
they can be more easily built into other devices or the overall machine. The actual products have
been checked for conformity to EMC standards.*1
Whether the products conform to the standards in the system used by the customer, however, must
be checked by the customer. EMC-related performance of the OMRON devices that comply with
EU Directives will vary depending on the configuration, wiring, and other conditions of the equip-
ment or control panel on which the OMRON devices are installed. The customer must, therefore,
perform the final check to confirm that devices and the overall machine conform to EMC standards.
Regulations and Standards
31
NX-series Safety Control Unit User's Manual (Z930)

Omron NX-SL3500 Specifications

General

Brand	Omron
Model	NX-SL3500
Category	Controller
Language	English